Pool Valet® 2 Hole Nozzle

Item is discontinued. Can either purchase a 1 hole and drill out the 2nd hole or get upgrade kit 006-502-4714

Paramount Pool Products Pool Valet® 2 Hole Nozzle.

The Pool Valet Nozzle® is manufactured by Paramount Pool Systems. Each hole on the Pool Valet® is either 1/4 inch or 3/8 inch. The nozzle comes with 4 partial holes in it. Only one or two are drilled out all the way. The nozzle can be ordered as a blank and it is left to the installer to drill out the proper holes.

Broken Pool Valet® Nozzles:

• Remove the nozzle threaded ring with the metal hand tool.Then replace the nozzle with a new nozzle that has the same size hole. When a nozzle breaks there is usually a reason and most of the time it is because debris has plugged one or more of the nozzles in that circuit so check all nozzles on the circuit(zone)for debris.
• If the threaded part of the body in the plaster is broken it can be repaired with a pool valet retro kit.
  Part numbers 004-502-5004-01,004-502-5004-02,004-502-5004-03,004-502-5004-04