Paramount Paralevel Start Up Kit 004-760-2921-00

Paralevel is continually working behind the scenes to ensure that your pool or spa is at its ideal level. You can rest easy knowing that your pool’s water level is being monitored and adjusted automatically. If you ever need to make a manual adjustment Paralevel’s "posi-click" adjustment makes it easy. One full turn equals 1/4" (6 mm) of water level adjustment.

 

Using new float in an older tank:
1. While holding the new float, twist sleeve counter clockwise until it comes out of the float.
2.Turn float over and re-thread on sleeve with flat side up. Be careful not to cross-thread.
3.Compare the float height on the sleeve to the old float. The new style float will need to be approximately 5/8 inch lower on the sleeve to achieve a similar water level.
4.Install in the housing and turn on the water supply.
5.If the float is off, shut off the water and remove the float and turn in the direction indicated on the flat side of the float to raise the water level 1/8 inch, one half turn, or 2 posi-clicks. Follow the arrows on the float.
6.If the float is on, shut off the water and remove the float and turn in the direction indicated on the flat side of the float to raise the water level 1/8 inch, one half turn, or two (2) posi-clicks. Follow the arrows on the float.
7.Repeat steps 5a or 5b until water level is matched.
8.Check pool level after a few days to verify correct set level.